| To: | tentec@contesting.com |
|---|---|
| Subject: | Re: [TenTec] Titan 425 Major H/L Voltage drop |
| From: | ken.d.brown@hawaiiantel.net |
| Reply-to: | Discussion of Ten-Tec Equipment <tentec@contesting.com> |
| Date: | Fri, 3 Dec 2010 19:27:06 +0000 (GMT) |
| List-post: | <tentec@contesting.com">mailto:tentec@contesting.com> |
The Titan 425 has two power supplies -- one that supplies 28VDC to run the logic and control circuits, and the 2.7kV supply for the output stage. True, and they come from two separate secondaries on the same transformer. The dial lights run from the 28VDC supply, so if they are dimming, it tells you there is a problem with the 28V supply. Probably, however... Excessive load on the HV secondary could also reduce the voltage produced by the 28 V secondary. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [TenTec] Ten Tec 263 external VFO info, W8BVH |
|---|---|
| Next by Date: | Re: [TenTec] Titan 425 Major H/L Voltage drop, Dr. Gerald N. Johnson |
| Previous by Thread: | Re: [TenTec] Titan 425 Major H/L Voltage drop, Jim Brown |
| Next by Thread: | Re: [TenTec] Titan 425 Major H/L Voltage drop, Jim Brown |
| Indexes: | [Date] [Thread] [Top] [All Lists] |