Thank you for the links. I was aware of the mods on Marshall Emm's
(mtechnologies) web site, but the replacement processor mod is really
exciting. It would bring the receiver capabilities up an order of
magnitude! Has anyone purchased this mod kit?
A couple more thoughts on the 1254 vs some of the shortwave portables.
The typical portable includes the FM broadcast band, and a built-in
ferrite antenna for the AM broadcast band, which may be important to
you. Also, they have a built in-whip antenna. The Ten-Tec is designed to
use an external antenna. However, AM/FM portable radios (some with
hand cranked power) are readily available. The Grundig/Eton receivers
seem to get mixed reviews. Some have tuning quirks or need their
alignment tweaked. The best of the shortwave portables seems to be the
Sony 7600 series. If you are looking for a "communications" receiver,
then the Ten-Tec stacks up well. Unlike the portables, it does not
overload when connected to an outside antenna. I typically run mine on
an 80 meter dipole or a full size 40 meter loop. As discussed, there is
enough room inside for mods, including filters, a muting circuit, etc.
Plus, it's fun to build. (I grew up in the heyday of Heathkit).
On 12/22/2010 9:29 AM, ARDUJENSKI@aol.com wrote:
> I want to thank the large group of you who responded to my question(s)
> pertaining to the TT-1254. I found them invaluable. Comments were balanced
> and well presented Additionally I wanted to share with you all two other
> I now feel well prepared to evaluate the PROs and CONs of TT-1254 and
> apply to my decision making process. Granted it is no "Eagle" purchase and I
> appreciate you taking the time to share your thoughts and insight
> Thank you all and a very Merry Christmas
> Alan KB7MBI
> TenTec mailing list
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1188 / Virus Database: 1435/3335 - Release Date: 12/24/10
TenTec mailing list