I used link coupled tuners on my centerfed long wire from 160 through
2m. Sometimes series tuned secondary, sometimes parallel tuned, and on
the higher bands parallel tuned and feed line tapped on the coil, where
it matched. Feed lines varied, mine was 30' high at the ends, 30 to 50
feet at the middle depending on the decade. Mine was 95m of #10 copperweld.
73, Jerry, K0CQ
On 1/12/2011 10:59 AM, Rick - NJ0IP / DJ0IP wrote:
> How do you match it?
> -----Original Message-----
> From: firstname.lastname@example.org [mailto:email@example.com] On
> Behalf Of ROD
> Sent: Wednesday, January 12, 2011 11:39 AM
> To: firstname.lastname@example.org
> Subject: [TenTec] ant
> I use no.12 stranded wire 315ft up 70 ft fed with ladder line to a 4 to 1
> balun worhs great on 160—10m.
TenTec mailing list