[Top] [All Lists]

Re: [TenTec] Omni 6 Logic Board Failure

To: jack b friend <jfriend31@comcast.net>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni 6 Logic Board Failure
From: mike bryce <prosolar@sssnet.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 17 Jan 2011 16:45:14 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I've been reading this thread here and there and I'm sure I've missed some of 
the finer details

So, my question is simple. The logic board failure. Is it due to the 
microprocessor failure or the 
entire pcb? If it's the actual uP, then that's one problem that going to be 
very hard to solve other 
than having a second rig for parts.

but if it's the failure of the pcb, then one could be manufactured  and 
improvements made.

Since I don't have one to compare, and unless there are specialized components 
such as
transformer or coils, it doesn't seem to be  a insurmountable problem.

Provided that the uP is not the problem.

someone, steer me in the right direction

Mike, WB8VGE
SunLight Energy Systems
The Heathkit Shop
J e e p
"If you can't explain it simply then you don't understand it well enough"
Albert Einstein 

On Jan 17, 2011, at 4:30 PM, jack b friend wrote:

> an extra rig of the sort one likes to use is surely a comfort, even if 
> expensive. I like the idea of having a spare just in case. you can see that 
> at QRZ when you search on AK7O.
> jack

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>