[Top] [All Lists]

Re: [TenTec] Do not do what I did.

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Do not do what I did.
From: george fritkin <georgefritkin@yahoo.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 12 Mar 2011 15:01:48 -0800 (PST)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I re-configured my station.  I added some new gear and when you have 18 
operating positions all with linears it is a major task.  One position has an 
ORION ll.  When checking all positions I discovered a problem with the ORION 
 It would power up ok and I heard RX noise but not stations.  Checked all bands 
nothing. I used another radio in the shack, but ORION could not hear the radio 
next to it! Well, before boxing it up I thought I would give the transmit a 
 When I grabbed the push to talk button on the mic I found the PTT switch was 
now.  I pushed it off, but still nothing no signals just noise.  Well, I 
I would cycle the power and when I did the ORION was back to life!  How the PTT 
was on I do not know.  I just thought I would pass this along.

George, W6GF


TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>