forgot the link at tentecwiki
On Mar 20, 2011, at 8:22, Rick W <email@example.com> wrote:
> Holger I wonder if it might be the power distribution board. The power
> distribution board is a very simple fix. You replace 3 electrolytic
> capacitors. You should try and get good quality, low ESR value caps with a
> HIGHER voltage rating than the original. Ron, N6IE, describes the fix on his
> Even if this is not the problem it is good to do the fix
> Good luck.
> Website: http://www.ve7tk.com
> To: <firstname.lastname@example.org>
> Subject: [TenTec] ORION 565
> From: "Holger" <email@example.com>
> Date: Sun, 20 Mar 2011 11:17:18 +0100
> Now i am a proud Owner from the famouse ORION 565, make the Softwareupdate to
> the latest Version 2.064XX11 and DSP 2.08b84, the Results now is fantastic.
> But, sometimes after switched on the Orion I, the Display with all
> are not coming on ,only white Display, Boot- Error or is this normal ?
> These Troubble i has had also before i make the above Update !
> Perhaps some Voltages inside are not correct?
> Maybe Help is possible?
> DJ8HB since 1962
> TenTec mailing list
TenTec mailing list