Many Thanks for your helpfull Letters. I hope it can be fixed these with new
Capacitors. Yes i know, the Capacitors are very important, but for me this
is a new situation with this ORION. Maybe a Ceramic- Capacitor parrallel to
the new 470µF is also helpfull.
Before i has used the FT990 and FT1000D for CW very bad, the TS930S from
Kenwood is mutch better, like perfect. Now the Orion with Dual-Receive anf
less Oszillatornoise beat the TS930S.
----- Original Message -----
From: "Rick W" <email@example.com>
To: "Ten-Tec Reflector" <firstname.lastname@example.org>
Sent: Sunday, March 20, 2011 4:22 PM
Subject: Re: [TenTec] ORION 565
> Holger I wonder if it might be the power distribution board. The power
> distribution board is a very simple fix. You replace 3 electrolytic
> capacitors. You should try and get good quality, low ESR value caps with
> HIGHER voltage rating than the original. Ron, N6IE, describes the fix on
> Even if this is not the problem it is good to do the fix
> Good luck.
> Website: http://www.ve7tk.com
> To: <email@example.com>
> Subject: [TenTec] ORION 565
> From: "Holger" <firstname.lastname@example.org>
> Date: Sun, 20 Mar 2011 11:17:18 +0100
> Now i am a proud Owner from the famouse ORION 565, make the Softwareupdate
> the latest Version 2.064XX11 and DSP 2.08b84, the Results now is
> But, sometimes after switched on the Orion I, the Display with all
> are not coming on ,only white Display, Boot- Error or is this normal ?
> These Troubble i has had also before i make the above Update !
> Perhaps some Voltages inside are not correct?
> Maybe Help is possible?
> DJ8HB since 1962
> TenTec mailing list
TenTec mailing list