[Top] [All Lists]

Re: [TenTec] TenTec 200 VFO

To: tentec@contesting.com
Subject: Re: [TenTec] TenTec 200 VFO
From: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Reply-to: geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 22 Mar 2011 17:30:57 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Usually you adjust L near the LF end of the range and C at the high end, 
when tuning is by variable capacitor. They interact so you have to move 
back and forth several times.

73, Jerry, K0CQ

On 3/22/2011 5:25 PM, BUDW2GLN@aol.com wrote:
> I am working on a model 200 VFO.....I have installed new dial and band
> change cords....WHEW  :-) and am in the process of trying to calibrate the
> master oscillator so that the unit will track end to end reasonably
> accurately...........
> I have the 200 instructions with print but do not have any other
> information at my disposal
> If anyone has a 200 and has attempted to do the accuracy alignment, I would
>   appreciate some help.  I just can't get it to track.......L1 and C1 are
> used to accomplish this but I'm not sure which is for which end  ???
> Thanks
> Bud, W2GLN
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>