[Top] [All Lists]

Re: [TenTec] TenTec 200 VFO

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] TenTec 200 VFO
From: wa3fiy@radioadv.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 22 Mar 2011 19:34:53 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Most L/C vfo's are adjusted at the low frequency end by the inductance (L) and 
at the high 
end by the capacitance (C).   There is usually some interaction so you have to 
repeat the 
adjustment several times until satisfied.




On 22 Mar 2011 at 19:25, BUDW2GLN@aol.com wrote:

> I am working on a model 200 VFO.....I have installed new dial and band
>  change cords....WHEW  :-) and am in the process of trying to
> calibrate the  master oscillator so that the unit will track end to
> end reasonably  accurately...........
> I have the 200 instructions with print but do not have any other 
> information at my disposal
> If anyone has a 200 and has attempted to do the accuracy alignment, I
> would 
>  appreciate some help.  I just can't get it to track.......L1 and C1
>  are  
> used to accomplish this but I'm not sure which is for which end  ???
> Thanks
> Bud, W2GLN
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>