[Top] [All Lists]

Re: [TenTec] Corsair CW issue

To: tentec@contesting.com
Subject: Re: [TenTec] Corsair CW issue
From: tubsc66@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 27 Mar 2011 18:11:11 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
 Thanks for the help fellas, the jumper was missing in the 1.8kc filter 
position, I installed one, and now I can
use the 2.4kc position when in the CW mode. Curiously, when Im in SSB mode, I 
can switch the xtal position 
to the 1.8kc spot (xtal "2") and still receive, when in CW mode, I can only 
listen in the 2.4kc spot (xtal "3"),
the other 2 positions are still deaf. So, if I obtain a 500hz filter but leave 
the 1.8 slot empty, do I leave the
jumper connected? BTW, the manual shows the only jumper to be in the 1.8 slot, 
there's no jumper associated
with the 500hz slot. Thanks so much! 73's

Chris KC5IIE


TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>