TenTec
[Top] [All Lists]

Re: [TenTec] Fwd: Model 715 question

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Fwd: Model 715 question
From: "David W LeJeune" <lejeuned@centurytel.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 26 May 2011 21:00:11 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I have a Heil Pro Set Elite - comes with 1/8 inch plugs. Definitely designed
for the broadcast industry, with flat response from 100hz to 12khz. One
thing about them - you can find an adapter from 1/8 inch to quarter inch -
either mono or stereo - haven't ever found the opposite - from 1/4 inch to
1/8 inch.

Just and observation!

Dave WN5V

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Richards
Sent: Thursday, May 26, 2011 7:51 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Fwd: Model 715 question

1)   Oops...  Not owning a HEIL Proset ... I missed the fact it comes 
with a 1/8 inch phone plug.    Another list member politely told me 
that, also...   Apparently, I need to be more rigorous when doing my 
homework.

2)    With due deference to HEIL headsets which I concede are VERY 
popular among ham operators,  I do not think of HEIL headsets when 
thinking state of the art in headset connectivity.    While 
acknowledging the popularity of HEIL headsets among hams,  HEIL is only 
one among a bevy of headset manufacturers in the overall audio market, 
and the 1/8 inch phone plug is NOT a standard connector except at HEIL's 
house.

I have been a headset junkie for many years, and I am confident, except, 
perhaps, for the HEIL products mentioned,  a 1/8 inch mono plug is NOT 
standard equipment on these things.   I either own now, or have owned, 
headsets by Sennheiser, Shure, AudioTechinica, BeyerDynamic, Eartec, 
Telex, AKG, Andrea Electronics, Samson, Knowles, Emkay, and many more. 
  I am familiar with the Pro-Com and Clear-Com lines and with the top 
selling selling aviation headset lines.

Outside the HEIL line, these things do not commonly come with 1/8 inch 
mono phone plugs.    I only have one headset, the Shure, the HW-501, 
discontinued in the late 1990s, that has a 1/8 inch mono phone plug.

That is just MY take, anyway...  I guess I am guilty of confusing the 
ham radio headset market (i.e., HEIL sets)  with the broader headset 
market, in general.


THANK YOU ALL FOR PITCHING IN AND ANALYZING THIS WITH ME.

I am thinking the easiest solution is to either buy a pile of battery 
boxes to provide the required bias voltage,... or make some up myself... 
  instead of
trying to modify the innards of the Model 715, itself.   I guess the 
bottom line is that I would have wired it for bias voltage, had it been 
my original design;  and of anyone used a mono dynamic mic connector, 
the bias voltage on the ring would shunt to ground on the plug shaft. 
  That would make it work like a computer sound card.

THANKS AGAIN FOR HELPING ME THINK THIS THROUGH !!!

------------------
Happy Trails.
=======================  Richards / K8JHR  =========================

On 5/26/2011 16:21, Barry N1EU wrote:

> If there is A standard in terms of mics/headsets, it could be argued
> that it's the Heil Pro Set and YES, it provides a 1/8 mono plug.  At
> least my two Pro Sets bought in the 2000's both are wired with a 1/8
> mono plug for the mic and 1/8 stereo plug for the headset.
> ___________________________________________________________
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>