Re: [TenTec] Corsair II U10 Problems

[Stuart Rohre <rohre@arlut.utexas.edu>]

Jerry, many times an intermittent in any radio can be traced to bad 
solder joints, socket corrosion, or bad contacts on interconnection 
cables.  If nay of those are in this model, you might simply check and 
correct those issues and fix your problem.  I don't remember if the 
Corsair used sockets or not, but solder might be an issue after this 
much time depending on the radio's travel history.

Good Luck,
Stuart Rohre
K5KVH

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec