[TenTec] Paralleling power supplies for Hec II

["Harry Coates" <WA8HC1@charter.net>]

Actually the Herc II is wired for 4 separate 25 amp power supplies, like the 
9420..  1 for each of the 4 final output units, and they should each be 
protected with separate 25 amp fuses.. The Herc II monitors each of the 4 power 
inputs separately to make sure they are all alike.. They should not be tied 
together in any fashion.. It would be alright to parallel at the power 
supplies/batteries, but, the feeders to the Herc II should  be 4 separate 
circuits.. Not 1 big fuse or even 2 large fuses.. Check the power input 
schematic in the manual...     “TEN TEC FOREVER AND RTTY TOO”

73,

Harry N Coates
WA8HC1@charter.net