try MixW2. it works like a charm. the trial version is the actual version
with a time limit. I have found it does the job for me. no interface
required. it works with the cable supplied with the Orion. the cable is set
for stereo. I joined the two audio cables into one for both input and
output. works great.
jack
ak7o
-----Original Message-----
From: Ed
Sent: Sunday, October 30, 2011 3:33 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] CW with O2, Fldigi, and SignaLink
On 10/30/2011 05:12 PM, John K3GHH wrote:
To those who offered help with my entry into digital modes, thanks... I
haven't pursued all of your advice yet but thought I'd see if I could
get the Kubuntu computer to interact with the O2 using CW.
With Fldigi set for OpMode = CW, and "CW" in the little box under the
frequency window, clicking on "CQ" causes the SignaLink red PTT
indicator to light, the Orion 2 carrier to come on, "CQ... de K3GHH..."
to appear in the Fldigi panes (black in the sent pane, red in the
receive), and the SignaLink relay to click out the Fldigi "CQ..." message.
But the O2 just puts out a steady carrier until Fldigi's "CQ" message
ends; it's not being keyed.
The Orion CW menu has "PTT in CW as: Key". I wired the SignaLink jumpers
as the TigerTronics Cables site shows for the Orion and O2: 1 to Mic, 2
to ground, 3 to PTT, and 4 to Spkr.
What am I missing? I hope the list isn't too long.
All modes in fldigi including CW are USB. That may be your problem.
Ed W3NR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|