[Top] [All Lists]

[TenTec] Omni 6/3 Serial Port Interface problem.

To: tentec@contesting.com
Subject: [TenTec] Omni 6/3 Serial Port Interface problem.
From: Paul <hglent@frii.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 23 Jan 2012 14:30:37 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I have discovered the RS232 is not interfacing with Ham Radi Deluxe. The 
serial interface has been working perfectly untill recently. I have gone 
through all of the normal trouble shooting steps like replacing the 
cable ( I don't use a USB interface..  I conect direct to the serial 
port on the PC)

I believe the problem is that the MAX232 IC has failed on the 81606 
Logic Board.  Not being the digital type guy, is there a way to confirm 
this?  Also are there replacements for this IC, and where do I find a 

A little more trouble shooting and diagnosis help is appreciated.


Paul K.

PS Please email me off list.

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Omni 6/3 Serial Port Interface problem., Paul <=