[Top] [All Lists]

Re: [TenTec] Re. [Ten Tec] Grounds

To: tentec@contesting.com
Subject: Re: [TenTec] Re. [Ten Tec] Grounds
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 24 Jan 2012 14:35:13 -0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On 1/24/2012 2:11 PM, George Allgood wrote:
> I keep seeing the word BONDED.

An electrical BOND is a connection between objects that is mechanically 
and electrically robust, has a very low impedance, and of sufficient 
diameter to carry any current likely to occur in the case of failure.  
In simple terms, this means a "short, fat, conductor that is 
mechanically quite secure at each end, and makes very good electrical 
contact at each end."

73, Jim Brown K9YC
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>