Last year Rolf, DL7VEE wrote an article for one of our local ham mags
describing his experience using a multi-band "Triple Leg" on DX-peditions.
This is similar to what you are thinking about doing.
A "Triple Leg" is a fancy name for an elevated ground plane, generally with
the three radials (legs) sloping at 45 degrees. This is one leg more than
what you are considering.
Rolf made his completely of wire, mounted on a fiberglass telescoping pole,
and fed it with openwire.
He got excellent results on several bands.
Bottom line, I think it is an excellent idea and worth trying out.
I will try to find the mag and send you some information on this.
(it's in German of course)
From: email@example.com [mailto:firstname.lastname@example.org]
On Behalf Of Richards
Sent: Friday, January 27, 2012 8:01 AM
To: email@example.com; Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals
Reason I ask is that I have been considering an off center fed 15 meter
vertical, with two radials, at about 45 degrees off vertical, with the
"base" or center feed point, set about 20 feet up. Vertical element 21
feet, radials 8 feet long.
There is a guy who makes these commercially, but feeds them with coax
and a 4:1 balun.
The notion of feeding at 300-400 ohm antenna with 450 ohm open line was
beginning to get interesting.
I have been experimenting with various feed-points on flat-top OCF
antennas, and have enjoyed a detailed discussion of same with Rick
DJ0IP. The notion of an OCF vertical dipole fed with open line is
intriguing. 450 ohm window line... Hmmmm...
================ James - K8JHR ==============================
On 1/26/2012 11:44 PM, Jim Brown wrote:
> On 1/26/2012 7:44 PM, Richards wrote:
>> What about a vertical dipole ?
> If it is in close proximity to the earth, it is unbalanced. Close in
> this context means as a fraction of a wavelength.
> 73, Jim K9YC
> TenTec mailing list
TenTec mailing list
TenTec mailing list