[Top] [All Lists]

[TenTec] RX366, v3 firmware

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: [TenTec] RX366, v3 firmware
From: John Henry <jhenry@tentec.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 30 Jan 2012 13:16:21 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Hi Pat,

The RX366 is a replacement for the existing sub-rx, giving more
features/functions/better receiver specs, making the main and sub at the
same performance level now. Along with a built in sub-rx preamp and
attenuator and slots for 3 roofing filters for the sub-rx.

Whereas it doesn't provide line level outputs for listening or computer
interfacing, it does have a 9MHz IF output connector on it in case someone
wanted to run a panadapter from their sub-receiver.

John Henry

On Mon, Jan 30, 2012 at 5:10 PM, Pat Patterson <ppattrsn at swbell.net
<http://lists.contesting.com/mailman/listinfo/tentec>> wrote:
>* Barry,*>* With the RX366 update to the OII is it possible to get 
>simultaneous line level*>* output from both the Main and Sub RX?  The 
>connectors are there on the OII but*>* the internal audio path isn't 
>complete.*>* Thanks,*>* Pat, W5VY*
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>