[Top] [All Lists]

Re: [TenTec] Oll & RF @mic input.

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Oll & RF @mic input.
From: Richards <jruing@ameritech.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 01 Feb 2012 07:08:01 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
If my memory serves me correctly... it seems one can solve the pin 1 
problem by connecting the mic ground pin and the overall ground pin on 
the 8-pin mic connector - which marries the mic ground and the chassis 
ground that way.

I have not found this necessary, but some microphones seem to need this 
connection to the chassis ground.

As Stuart suggests, maybe adding a temporary jumper on the plug pins 
will be enough to test this out before making permanent improvements.

====================  K8JHR  ========================

On 1/31/2012 9:18 PM, Stuart Rohre wrote:
> The connector shell issue and grounding to chassis probably is the cure.
> Easy to try that shell grounding with a short clip lead first.
>   From outside.  GL!
> _______________________________________________

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>