I hope that the 539 will include the 60 meter channels, now that CW and
digital modes are allowed there!
On 1/31/2012 2:28 PM, Chris Hansohn wrote:
> Can't wait for the 539...
> Chris, K4RCH
> On Jan 31, 2012, at 13:30, John Henry<email@example.com> wrote:
>> Back at the 12th annual Hamfest, TenTec announced several new products that
>> we would have in production, for sale, late 2011 and early 2012.
>> Today, I am pleased to announce that we have met our goals on the following:
>> Model RX366 High Performance ASR Sub-Receiver for the Orion Model 565 and
>> Orion II Model 566. This is a new contest grade second receiver for the 565
>> and 566 Orion series of transceivers. This new second receiver uses ASR
>> (Advanced Signal Reception) technology like what is already a proven winner
>> in the Eagle to provide a great enhancement to the rig. The RX366, requires
>> the new V3 Orion 565 and Orion II 566 firmware. With V3 installed and the
>> RX366 installed, the Orion(s) now have vastly superior performance to the
>> original sub-receiver in terms of immunity to interference from adjacent
>> strong signals and immunity to overloading from very strong signals present
>> on the band. Your Orion 565 and Orion II 566 have never worked so well
>> Price = $639.00
>> (1 2.4kHz filter included)
>> Model 717 - Microphone Equalizer / Audio Interface. The 717 will allow you
>> to connect new dynamic microphones, such as the Regal Model 707 Desk
>> Microphone to older rigs that required a higher microphone input level such
>> as from an electric mic element.
>> The unit works with Icom, Yaesu, Kenwood as well as older Ten-Tec
>> transceivers using 4 or 8 pin circular microphone connectors. Now you can
>> use the rally cool Regal Model 707 Microphone with an older Ten-Tec rig
>> such as an OMNI-VII. You can tweak the actions of hi and low frequencies to
>> meet your needs.
>> Price = $119.00
>> Model 318 Amplifier Key Interface. The 318 will allow you to dial in a
>> delay when you connect older linear amplifiers to your transceiver. This
>> will be useful if the amplifier is not designed for full break-in. An
>> excellent seamless add-on for Eagle users who want to adjust the
>> transmitted output to work with older amplifiers. Adaptable to almost any
>> Price = $89.00
>> Note: V3 firmware for the 565 and 566 is in the process of getting bundled
>> up and placed on the internet. Estimate for V3 release and posting is by
>> 5pm EST Tuesday.
>> Best Regards,
>> John Henry
>> TenTec Inc.
>> TenTec mailing list
> TenTec mailing list
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1901 / Virus Database: 2112/4779 - Release Date: 02/01/12
TenTec mailing list