As goofy as it sounds, the ALC can be affected by the SWR of the antenna. Try
using a dummy load and see if the ALC blinks with voice peaks.
It's not at all uncommon for a ten tec rig to go into over current protection
and never light the ALC indicator.
Sent from my iPhone
On Feb 23, 2012, at 3:16 PM, John Molenda <firstname.lastname@example.org> wrote:
> Hello all , new Eagle here . I followed directions to get on SSB and I
> can not get the alc light to flicker on voice peaks even with the mic
> gain turned up all the way . am using supplied TT hand mic . John kb2huk
> BTW the rx is so nice and quiet , great rig .
TenTec mailing list