[Top] [All Lists]

Re: [TenTec] Orion - Ver. 3.30 / RF GAIN

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Orion - Ver. 3.30 / RF GAIN
From: Barry N1EU <barry.n1eu@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 24 Feb 2012 12:37:29 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
It seems like an easier fix would be a firmware option to swap AF Gain and
RF Gain controls, although that's out of our control.

Barry N1EU

On Fri, Feb 24, 2012 at 12:35 PM, Barry N1EU <barry.n1eu@gmail.com> wrote:

> On Fri, Feb 24, 2012 at 12:13 PM, Rick - DJ0IP / NJ0IP <Rick@dj0ip.de>wrote:
>> Normally the Attenuator has nothing to do with the RX ANT jack.
>> It is in the line coming from the TR relay and going to the RX input.
>> What I mean is cut this cable and splice in an external attenuator.
> Yes, that's what I didn't understand - the part about cutting the internal
> cable and bringing it out to the external attenuator.  And if you use the
> subrx, you need to do this X 2.
> Barry N1EU
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>