Thank you for the reply- almost fixed it looks like N1MM. Now when
switching VFO with the mouse it defaults to left hand phone is main and
right hand phone is the sub. and L/S now stays with both.
Its nice to have experts around on this reflector to show guys like me where
we go wrong.
73 Dave G3RXP
----- Original Message -----
From: "Barry N1EU" <email@example.com>
To: "Discussion of Ten-Tec Equipment" <firstname.lastname@example.org>
Sent: Sunday, February 26, 2012 10:33 AM
Subject: Re: [TenTec] Orion 2 ver 3.028 and N1MM
> In N1MM Logger, you need to turn on the "dual rx always on" option in the
> Config menu.
> Barry N1EU
> On Sun, Feb 26, 2012 at 10:24 AM, Dave G3RXP <email@example.com> wrote:
>> Good Morning All,
>> I wonder if there is someone who could point me in the right direction
>> with this query.
>> When switching the TX from A to B VFO manually and back again it works
>> fine but when I load N1MM up and select either VFO A or VFO B by pointing
>> the mouse at the VFO header it switches OK but I loose the AUDIO menu
>> setup on the Orion and all three selections i.e Left/Right phone and L/S
>> default to "Main".
>> Im using left headphone - "Main" and right Headphone - "Both" with L/S -
>> I will be buying the 2nd RX for the Orion and the Audio settings will be
>> as above.
>> 73 Dave G3RXP
>> TenTec mailing list
> TenTec mailing list
TenTec mailing list