[Top] [All Lists]

Re: [TenTec] adding xtal filter to the Orion

To: "nq4i@contesting.com" <nq4i@contesting.com>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] adding xtal filter to the Orion
From: Kim Elmore <cw_de_n5op@sbcglobal.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 27 Feb 2012 14:48:53 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Now I'm puzzled. If the problem is noise/distortion from an offending 
transmitter, no amount of filtering in the rx will help that. If the 
transmitter is radiating in the rx pass and, the transmitter has to be cleaned 

I must be missing something...?

Kim N5OP

On Feb 27, 2012, at 13:09, nq4i@contesting.com wrote:

> Hi Barry. It would be a band specific filter with about 5 khz of response. 
> Sherwood Engineering made a special order version abt 20 years ago. The good 
> thing about the Orion is it is one of the cleanest transmitters made. Right 
> now my signal leve from the second station is approximately s4. Reducing that 
> by 40 db or more would open up the other rcvr a lot. So the filter would be 
> before every stage in the rcvr.   Rick
> Sent on the Sprint® Now Network from my BlackBerry®
TenTec mailing list
<Prev in Thread] Current Thread [Next in Thread>