[Top] [All Lists]

[TenTec] adding xtal filter before Orion

To: "'tentec@contesting.com'" <tentec@contesting.com>
Subject: [TenTec] adding xtal filter before Orion
From: "Zivney, Terry" <00tlzivney@bsu.edu>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 28 Feb 2012 08:49:34 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I think Rick wants a receiver loop like some of the Icom rigs have where a 
receive preamp or
preselector  (read xtal filter) could be inserted.  I think on the Orion you 
can break in at a
TMP connector which goes to the main RX board and loop that out the back of the 
to the external preselector box and then back into the Orion to go to the main 
RX board.
I'm not sure where the Transverter input goes; you may want  to check that out, 
and you
can use the space RCA connector on the back panel for a second terminus to make 

Good luck!

Terry Zivney, N4TZ/9
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] adding xtal filter before Orion, Zivney, Terry <=