[Top] [All Lists]

[TenTec] Corsair II RF gain

To: <tentec@contesting.com>
Subject: [TenTec] Corsair II RF gain
From: "Paul DeWitte" <k9ot@yousq.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 21 Mar 2012 14:44:05 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I have 2 Corsair IIs. I have found that for a weak signal on a noisy band, 
turn up the AF gain and then back off the RF gain until just before you 
loose everything.
There is a very narrow spot in there that you can eliminate most of the band 
noise, but not loose the signal. Back it off a bit more and all is lost.

This is basically what Gary said in his first post.

Also play with the band pass filter. Both of these adjustments may change 
from band to band, and noise conditions.

Just my opinion,
73 Paul K9OT 

TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>