[Top] [All Lists]

[TenTec] OMNI VI+ found 12m

To: tentec@contesting.com
Subject: [TenTec] OMNI VI+ found 12m
From: Don Rasmussen <wb8yqj@yahoo.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 30 Mar 2012 12:34:15 -0700 (PDT)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Ten Tec had the crystal for 12m, what a blessing, but it turns out I did not 
need it, the 12m crystal is located closest to one of the board mounting holes. 
The side of the crystal closest to the hole had broken at the solder 
connection. It works FB now after resoldering it. 

--- On Sun, 3/25/12, Don Rasmussen <wb8yqj@yahoo.com> wrote:

From: Don Rasmussen <wb8yqj@yahoo.com>
Subject: Re: OMNI VI+ lost 12m
To: tentec@contesting.com
Date: Sunday, March 25, 2012, 9:13 AM

Thanks Rick, I can probably cheat and set an external receiver w/probe at the 
crystal frequency, probably the next course of action. 

Re: [TenTec] OMNI VI+ lost 12m
from [Rick - DJ0IP / NJ0IP]    [Permanent Link][Original]


This is another case where a scope would be a real blessing.
You would see in a few seconds whether or not the oscillator were

Rick, DJ0IP
TenTec mailing list

<Prev in Thread] Current Thread [Next in Thread>