TenTec
[Top] [All Lists]

[TenTec] Station power

To: tentec@contesting.com
Subject: [TenTec] Station power
From: "k3hx@juno.com" <k3hx@juno.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 4 Sep 2012 03:08:22 GMT
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Message: 21
Date: Mon, 03 Sep 2012 20:40:44 -0500
From: Floyd Rodgers <kc5qbc@swbell.net>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Station power supply??
Message-ID: <50455C1C.4020902@swbell.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I've blown several regulator chips in my 35a. Last time around I just bought a 
handful. Simple fix since it is socketted. I hear if you tie the negative 
terminal to the case/ground, it ends the problem that kills the regulator, but 
it also means you can no longer run two units in series to get 24v if needed.
I went a different path for shack power using two 100ah deep cycles and a 40a 
RV inverter supply (not a switcher!). Works well since the radios stay up for 
about 5 days after the AC mains go down. It also takes care of the occasional 
60a loads the astron could not handle. 

----

I would be grateful to know the brand name and model number of the RV inverter 
that does not use switching technology.  

When I ran my Astron linear power supply in conjunction with deep
cycle batteries, I put a 40 amp rated Schottky diode on an electrically 
isolated heat sink and set the float voltage at the
battery terminal.  

72,

Tim Colbert  K3HX



____________________________________________________________
Woman is 53 But Looks 25
Mom reveals 1 simple wrinkle trick that has angered doctors...
http://thirdpartyoffers.juno.com/TGL3131/504570db7038370db41dfst04duc
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Station power, k3hx@juno.com <=