TenTec
[Top] [All Lists]

Re: [TenTec] Paragon Reed Relay

To: Bobby@McKahans.com
Subject: Re: [TenTec] Paragon Reed Relay
From: Jim <w3ka@lycos.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 17 Dec 2012 18:23:13 +0000 (UTC)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>

>
>Hello "fellow Paragon fans"..
>  Would like to comment on the Paragon issues a bit, I have owned my paragon 
> for about
>15 years now, and truly like the rig, (when it is working).  It seems to 
>require
>a lot of attention.
>The issue with garbled audio has usually appeared to be caused by the major 
>loop board
>soldering and board issues.  Specifically, the grounding shields around the 
>VCOs
>seem to be
>the major weak points.  Resolder all the ground shields to the board again, 
>and of
>course if you have the board out on the bench, look it over carefully for 
>seperated
>"lands"..
>and resolder anything (and everything) that looks like or could be 
>questionable.
>  As far as the relays, another Paragon owner had given me a replacement stock 
> number
>for an equivalent replacement.. I will search for that info and get back to 
>you..
>              73, Good Luck !!!    Jim W3KA
>
>on Dec 15, 2012, Bobby McKahan K4VE <Bobby@McKahans.com> wrote:
>>
>>Thanks for the comeback Mike but I can't find anything on the US relay. Don't 
>>even
>>know which ones to order either. Need some help. Also, my Paragon I has a 
>>problem
>>where if you turn up the RF it gets really garbled, that and sometimes 
>>something
>>in the rig happens and the signal and audio gets really great with no 
>>touching anything.
>>Other times it seems muffled. I really don't know, I do like the radio and 
>>don't
>>want to give up. Thanks Bobby K4VE
>>_______________________________________________
>>TenTec mailing list
>>TenTec@contesting.com
>>http://lists.contesting.com/mailman/listinfo/tentec
>>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>