TenTec
[Top] [All Lists]

Re: [TenTec] Argonauts

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Argonauts
From: Karl Schwab <ktschwab@yahoo.com>
Reply-to: Karl Schwab <ktschwab@yahoo.com>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 16 Feb 2014 07:39:25 -0800 (PST)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I just fired up my Ten-Tec Argonaut 509 behind my 3 el tri-band yagi on 10 
meters SSB (here in Michigan) and working into Europe with no problem!  73, de 
KO8S

 

________________________________
 From: Richards <jrichards@k8jhr.com>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com> 
Sent: Sunday, February 16, 2014 1:11 AM
Subject: Re: [TenTec] Argonauts
  

I understand that sort of thrill.

When I was a very new ham, myself, I contacted a guy operating portable 
with a very low temporary 20 meter antenna in DEATH VALLEY, and he 
worked me here in Michigan with a mere 5 watts SSB.   I was his first 
contact from that site and I could just sense and FEEL his excitement as 
he asked me to repeat my call sign and location - because he could not 
believe he heard me correctly.   I really sensed his excitement, and it 
left an indelible impression about operating QRP.   I imagined the guy 
jumping up and down and hollering afterward.

Similarly, I once worked a guy running 5 w SSB from AZ and testing a 
home brew microphone compression circuit.    I could just feel his 
excitement when he learned he was a true 5-9 in Michigan.  I sent him a 
digital recording of the QSO, so he could make a first hand assessment 
of his audio using the home brew compressor.  This led to an extensive 
correspondence about microphones and such afterward.  The QRP thing 
seems a lot of fun.

Working these guys, and sensing their excitement, gave me a special 
appreciation and insight into this aspect of the hobby.

--------------------  K8JHR  -------------------------------





On 2/15/2014 7:44 PM, Paul Gates wrote:
> Back in 1979 I had a Argonaunt 509 with a 3 element beam on roof of a 2 story 
> home and worked a guy from Mich. in Dallas. he was using a converted HT CB 
> and said I was 20 on his HT. This was on 10 meters

_________________________________
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>