TenTec
[Top] [All Lists]

Re: [TenTec] Any update on a replacement for the Orion II?

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Any update on a replacement for the Orion II?
From: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 7 Apr 2014 15:13:20 +0200
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
You have all the time in the world, John, just as long as it's ready by mid
October!  ;-)

When I get a chance, I'll fire up my logging software and define exactly
what the mode problem is when double-clicking a call sign in the bandmap.  

The bandwidth problem is easy to describe.
When you launch the logging program, it finds the radio and takes over
control.
At that point it ceases to allow you to adjust the Eagle's bandwidth using
the front panel control, and the software itself has no built-in way of
sending commands to the radio.  What is needed is to send a command to the
Eagle saying "BW=0"  I don't recall the specific context.  Perhaps it was
"BW 0".  This would return bandwidth control to the Eagle.  

73 - Rick, DJ0IP
(Nr. Frankfurt am Main)


-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of John Henry
Sent: Monday, April 07, 2014 2:49 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] Any update on a replacement for the Orion II?

Regarding control interfaces.
Everything TEN-TEC makes from this point on will follow either the Orion II
or the OMNI-VII protocol.
There are minute differences between the Eagle and the Orion protocols. For
instance, the version query, the Eagle returns text to say it is an Eagle
599, the Orion returns 565 or 566. So, yes, the control programs need to
change IF they look for the version name. And when necessary, there may be
other minor changes from rig to rig. e.g. the Eagle does not respond to
second receiver Orion commands. It doesn't have one.
Every attempt is being made to keep them all always on those two protcol
paths, so, hopefully, unless the control program asks "who are you?" with
the ?V command, it should work pretty much using the Orion command set (for
the Eagle/ArgoVI), or the Jupiter command set (for the OMNI-VII).
Sorry for the two branches of commands, but we are where we are and those
were brought out different many many years before my control.
I guess OMNI-RIG should get an update, but I don't know who will do that for
TEN-TEC. I have do have a bone to pick though, another company gets several
volunteers to update those for them. Wonder why...... We do all we can with
our hands as full as they are. This omni-rig request has been on the
reflectors for quite some time. For the Eagle, and other TEN-TEC rigs.
I'm very busy working on a hardware enhancement for one of our current
production rigs, and a software update for the OMNI-VII, new rig
development, etc.  We be very very busy in house.
Orion II replacement? Someday, but not right away, that takes time.

Thanks, and 73,
John Henry, KI4JPL
TEN-TEC Engineering
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>