TenTec
[Top] [All Lists]

Re: [TenTec] Hercules 444 amp

To: "k9yc@arrl.net" <k9yc@arrl.net>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Hercules 444 amp
From: Brian Carling <bcarling@cfl.rr.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 9 Aug 2014 10:12:45 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Seems like a lot of RF power transistors are similar, so it should not be too 
difficult to find a substitute.

Best regards - Bry Carling



> On Aug 9, 2014, at 8:56 AM, Jim Brown <k9yc@audiosystemsgroup.com> wrote:
> 
>> On 8/9/2014 12:37 AM, Douglas via TenTec wrote:
>> Has anyone figured out a substitute for the final transistors in the 
>> original Hercules amp?
> 
> You might ask on the amps reflector. I suspect the answer is still no. I 
> owned one of these amps for a few years and sold it. The original story, as I 
> heard it, is that Motorola learned that the output transistors had  problem, 
> and discontinued them.
> 
> The power supply also has a temperature stability problem that causes Vcc to 
> rise, which in turn causes it to go into self protect mode as it warms up. I 
> decided to fix mine with a fan on the power supply. :)
> 
> 73, Jim K9YC
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>