TenTec
[Top] [All Lists]

Re: [TenTec] RX-366 question

To: n4py3@earthlink.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] RX-366 question
From: Barry N1EU <barry.n1eu@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 10 Dec 2014 01:04:46 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
The cover is marked with one end saying "toward front of radio".

Perhaps they initially provided the filter cover from an Eagle and they
eventually made a different cover for the RX-366.

No worries, it's working fine now.

Barry N1EU

On Wed, Dec 10, 2014 at 12:53 AM, Carl Moreschi <n4py3@earthlink.net> wrote:

> Any chance the cover can go on two ways and one is backwards?
>
> Carl Moreschi N4PY
> 58 Hogwood Rd
> Louisburg, NC 27549
> www.n4py.com
>
> On 12/9/2014 6:58 PM, Barry N1EU wrote:
>
>> Through trial and error I've discovered it's actually the other way
>> around.  "Sub-Rx Slot 1" in the menu controls the slot toward the front of
>> the Orion, marked F1 on the board and F3 on the cover.  I also realize I
>> might have a very early production filter cover that was subsequently
>> corrected and that would explain my confusion.
>>
>> 73, Barry N1EU
>>
>> On Tue, Dec 9, 2014 at 11:44 PM, Barry N1EU<barry.n1eu@gmail.com>  wrote:
>>
>>  Can an RX-366 owner out there confirm that filter slot F1 is toward the
>>> rear of the Orion and slot F3 is toward the front of the Orion?  That's
>>> how
>>> it's labeled on the filter retaining cover but the silkscreen on the
>>> board
>>> itself where the filters plug in has it the other way around.
>>>
>>> Thanks&  73,
>>> Barry N1EU
>>>
>>>  _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>  _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>