TenTec
[Top] [All Lists]

Re: [TenTec] Eagle 9MHz tap questions.

To: "'R. Eric Sluder-W9WLW'" <resluder@yahoo.com>, "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Eagle 9MHz tap questions.
From: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 22 Dec 2014 20:46:25 +0100
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Is it just a tap, like perhaps a Y-connection, or does it also have a buffer 
stage?
Unfortunately my Eagle fell out of the nest before that feature was added to 
the radio.

73 - Rick, DJ0IP
(Nr. Frankfurt am Main)


-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of R. Eric 
Sluder-W9WLW via TenTec
Sent: Monday, December 22, 2014 7:44 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Eagle 9MHz tap questions.

It is after the mixer and before the roofing filter.  I don't have the 
schematics handy where I am at, but I do recall it between those two segments.  
I'll be back in my shack later tonight and can look at schematics then.
73 -EricW9WLW
 
      From: Katz Ajamas <ajamas.rn@gmail.com>
 To: tentec@contesting.com
 Sent: Monday, December 22, 2014 1:17 PM
 Subject: Re: [TenTec] Eagle 9MHz tap questions.
   
Eric-

I've carefully gone over the schematics and can not find the tap. They are 
dated 2010 and I can not find any revision notes either. I will really 
appreciate it if you can tell me where the 9MHz tap is located. To be clear, I 
am not talking about the modification to add a second receiver that is added 
after the low pass filters. The 9MHz tap should be somewhere after the first 
mixer and before the second mixer. I just don't see it on the schematics from 
the tentec web site.

73,
-Bob



> Message: 1
> Date: Sun, 21 Dec 2014 13:23:33 -0500
> From: "R. Eric Sluder via TenTec" <tentec@contesting.com>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Subject: Re: [TenTec] Eagle 9MHz tap questions.
> Message-ID: <5227AC58-CE90-4CC7-B482-2398FB193DA1@yahoo.com>
> Content-Type: text/plain;      charset=utf-8
>
> Bob,
>
> I am in the "man cave" watching football and cannot answer your 
> question directly; the schematics are online at TT and that is where I found 
> the tap.
>
> 73
>
> -Eric
> W9WLW
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


   
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>