TenTec
[Top] [All Lists]

Re: [TenTec] Model 544 (or that era) part source needed

To: "tentec@contesting.com" <tentec@contesting.com>
Subject: Re: [TenTec] Model 544 (or that era) part source needed
From: Peter Bertini <radioconnection@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 5 Aug 2015 11:00:36 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Those LED displays date back to the 1970's, or maybe even a bit earlier.

The 54 used HP-5082 series LEDs for all counter sections... these 7 section
LED displays were .43"  (10.92mm) and common cathode, with right hand
decimal points.

The correct LED for the green display is a HP 5082-7671.  You could
substitute a red display--HP 5082-7651, or a  yellow display, HP 5082-7661.
  The red displays are extremely common and show up on eBay.  The green and
yellow displays are tad more uncommon, but this should still be a 1 to 5
dollar part on the surplus market since zillions were made.

regards

Pete  k1zjh
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>