TenTec
[Top] [All Lists]

[TenTec] Fw: Relays for a Paragon. Hopefully......

To: <TenTec@contesting.com>
Subject: [TenTec] Fw: Relays for a Paragon. Hopefully......
From: "Rodney" <w3krq@dejazzd.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 29 Oct 2015 14:07:42 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I still have this complete with 14 relays for sale these relays are surface mount. This would be good insurance at 110.00 when it cost 110.00 labor at TenTec.
-----Original Message----- 
From: Rodney
Sent: Saturday, October 24, 2015 5:32 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Relays for a Paragon. Hopefully......

I have a low pass board for a Ten Tec Eagle . I though I needed a relay
found out the trouble was on the tuner board. I now have a complete board
for the Eagle if I had sent the Eagle down for repairs it would have cost me
shipping and 110.00 for labor plus parts, It cost me 190.00 for the board, I
no longer have the Eagle so I am selling the low pass board for 140.00
shipped.

-----Original Message----- From: Wade Staggs
Sent: Saturday, October 24, 2015 5:17 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Relays for a Paragon. Hopefully......

*Thanks Peter,*
*                        If we can't get OEM? My plan will now be to
replace them all. And thanks again for the advise.*
*                                                      73 from Wade/KJ4WS*

On Sat, Oct 24, 2015 at 3:56 PM, Peter Frenning [OZ1PIF] <peter@frenning.dk>
wrote:

Den 24-10-2015 kl. 21:57 skrev Wade Staggs:

*Paul, at Ten Tec says that the Relays for the Low Pass Filter Board for
the Paragon, are no longer available. Written on the white body of the
relay is Wabash and the part # on the relay is 1925-3-2 ...... I am
finding
them pretty Unobtainium from all of my usual sources also. Does anyone
have
a decommissioned Paragon with a good Low Pass Filter Board? Or any spares
of this relay? We have found some Wabash Reed Relays that are a perfect
Sub. Exact Pin Out and Dimensions. The relays we found do the exact same
job in a Collins KWM-380. I just hate to use Non OEM Parts, no matter how
close the match is.*
*                                                    73 to All from
Wade/KJ4WS*

Please note, if you have to go the second source route, that you have to
pair the relays so that a given band will be using to identical relays,
(same close/open characteristics and current consumption).

Several years ago, while I still owner my Paragon, I had to go that route,
and Paul at TT stressed the point to me (was also very helpful with
obtaining alternative relays)

--
Vy 73 de OZ1PIF/5Q2M, Peter

******************************************
** If it sounds too good to be true --  **
** it is!                               **
** If it sounds about right -- make     **
** sure you can afford to be wrong!     **
**                                      **
**           -- Robert Heinlein:        **
**           "Time enough for love"     **
******************************************
email: peter(no-spam filler)@frenning.dk
http://www.frenning.dk/oz1pif.htm
Ph. +45 4619 3239/ +45 2332 9464
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
******************************************

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



--
*Living one day at a time with Jesus as my Savior. But, still having Fun.*
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>