TenTec
[Top] [All Lists]

Re: [TenTec] Updating via a Mac running Parallels?

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Updating via a Mac running Parallels?
From: Froiseth Richard <Rfwd6dok@centurylink.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 16 Feb 2016 12:22:52 -0700
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Phil,

I use Parallels with my Mac and have not had any problems.  I run all my Ham 
programs along with a weather program, again with no problems.
I have not completed a upgrade using Parallels as of yet, but I don’t see why 
it would not work.  I will be trying an upgrade to my Orion II soon.  Hope this 
might help.

73’s
Rich, WD6DOK







> On Feb 16, 2016, at 11:10 AM, Phil Sikes <psikes@whidbey.net> wrote:
> 
> Can anyone verify that running Windows under Parallels on a Mac will work to 
> do the upgrade? This is the first upgrade for the O II since I switched over 
> to a Mac Mini. 
> 
> Thanks, Phil N7UX
> 
> Sent from my iPad
> 
>> On Feb 16, 2016, at 9:00 AM, tentec-request@contesting.com wrote:
>> 
>> Send TenTec mailing list submissions to
>>   tentec@contesting.com
>> 
>> To subscribe or unsubscribe via the World Wide Web, visit
>>   http://lists.contesting.com/mailman/listinfo/tentec
>> or, via email, send a message with subject or body 'help' to
>>   tentec-request@contesting.com
>> 
>> You can reach the person managing the list at
>>   tentec-owner@contesting.com
>> 
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TenTec digest..."
>> 
>> 
>> Today's Topics:
>> 
>>  1. Re: Replacing battery in Orion II (Don Prater)
>>  2. Dropbox Links for latest Eagle and OMNI-VII updates (John Henry)
>>  3. Re: Dropbox Links for latest Eagle and OMNI-VII updates
>>     (P C Andy Anderson)
>>  4. Orion II 3.033xe on dropbox (John Henry)
>> 
>> 
>> ----------------------------------------------------------------------
>> 
>> Message: 1
>> Date: Tue, 16 Feb 2016 05:35:20 -0500
>> From: "Don Prater" <w4to@tds.net>
>> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
>> Subject: Re: [TenTec] Replacing battery in Orion II
>> Message-ID: <35203971F7F84DF489D8C51B2EFD2A84@Gateway>
>> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>>   reply-type=original
>> 
>> Billy,
>> Thanks for the response.
>> I will give that a try.
>> Don
>> 
>> -----Original Message----- 
>> From: Billy Cox
>> Sent: Monday, February 15, 2016 10:35 PM
>> To: Discussion of Ten-Tec Equipment
>> Subject: Re: [TenTec] Replacing battery in Orion II
>> 
>> Don,
>> 
>> Do you have the optional RX-366
>> Sub receiver installed?
>> 
>> (Not the factory standard sub-RX)
>> 
>> That setup question is only for IF
>> you have the optional RX-366 IIRC?
>> 
>> If you have the stock sub-RX ...
>> 
>> Try your setup again, and say NO
>> when asked about the sub RX.
>> 
>> Let us know what happens please.
>> 
>> Hope this helps!
>> 
>> 73 de Billy, AA4NU
>> 
>> 
>> 
>>> On Feb 15, 2016, at 9:22 PM, Don Prater <w4to@tds.net> wrote:
>>> 
>>> Barry,
>>> Thanks for your reply. I was very careful not to disturb any of the
>>> cables when replacing the battery.  When it ask if there was a
>>> sub receiver I answered yes. When it came up again it indicated
>>> on the display there was a sub receiver. I don't see any s meter
>>> action when I select main ant go to the sub receiver or sub antenna.
>>> I will check the cables again.
>>> Don
>>> -----Original Message----- From: Barry N1EU Sent: Monday, February 15, 
>>> 2016 4:33 PM To: Discussion of Ten-Tec Equipment Subject: Re: [TenTec] 
>>> Replacing battery in Orion II
>>> Don, what do you mean it won't "recognize" the subreceiver?
>>> 
>>> You might want to pull the front panel off and check the cables carefully.
>>> 
>>> 73, Barry N1EU
>>> 
>>>> On Mon, Feb 15, 2016 at 8:38 PM, Don Prater <w4to@tds.net> wrote:
>>>> 
>>>> I have replaced the battery in my Orion II.
>>>> I have done a RAM clear and Master Reset.
>>>> When I turn the radio on all is ok except for the sub receiver.
>>>> It will not recognize the sub receiver.
>>>> Any idea on what to do next?
>>>> 
>>>> Don...W4TO
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec 
>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 2
>> Date: Tue, 16 Feb 2016 09:51:36 -0600
>> From: John Henry <jshenry1963@gmail.com>
>> To: tentec@contesting.com
>> Subject: [TenTec] Dropbox Links for latest Eagle and OMNI-VII updates
>> Message-ID:
>>   <CAN6xzWfa3gnvvwcZD=m0g_9N5idV2SGk_=suiOOO10qJgrJV0g@mail.gmail.com>
>> Content-Type: text/plain; charset=UTF-8
>> 
>> Given that some customers do not want to use Yahoo, I added the two setup
>> files to my public dropbox area.
>> The following links should give you access to download them.
>> Windows may say that exe's "is not commonly downloaded and could be
>> dangerous."
>> Well, I created them on a clean PC, so they should be clean.
>> Posting these in my dropbox and also on the yahoo groups is only temporary.
>> Once the main tentec.com website is organized and working better, then all
>> updates will go there instead.
>> 
>> uh, look for the name of the radio you want in the link name, e.g.
>> 588-setup.... or 599-setup..
>> 
>> https://dl.dropboxusercontent.com/u/2246476/588-Setup-1.037.exe
>> 
>> https://dl.dropboxusercontent.com/u/2246476/599-Setup-2.3.exe
>> 
>> 73, KI4JPL
>> John Henry
>> 
>> 
>> ------------------------------
>> 
>> Message: 3
>> Date: Tue, 16 Feb 2016 16:12:15 +0000
>> From: P C Andy Anderson <xtraham58@hotmail.com>
>> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
>> Subject: Re: [TenTec] Dropbox Links for latest Eagle and OMNI-VII
>>   updates
>> Message-ID:
>>   
>> <BY2PR16MB0742D86D3FD61AA64BEE66FDB9AD0@BY2PR16MB0742.namprd16.prod.outlook.com>
>> 
>> Content-Type: text/plain; charset="iso-8859-1"
>> 
>> Hi John,  Can you put the latest firmware update for the Oll in the dropbox? 
>>   This might help me to get .033xe installed. I have tried 5 times using the 
>> procedure I have in hand, but no luck.
>> 
>> 73, Andy, W3LI
>> 
>> ________________________________________
>> From: TenTec <tentec-bounces@contesting.com> on behalf of John Henry 
>> <jshenry1963@gmail.com>
>> Sent: Tuesday, February 16, 2016 10:51 AM
>> To: tentec@contesting.com
>> Subject: [TenTec] Dropbox Links for latest Eagle and OMNI-VII updates
>> 
>> Given that some customers do not want to use Yahoo, I added the two setup
>> files to my public dropbox area.
>> The following links should give you access to download them.
>> Windows may say that exe's "is not commonly downloaded and could be
>> dangerous."
>> Well, I created them on a clean PC, so they should be clean.
>> Posting these in my dropbox and also on the yahoo groups is only temporary.
>> Once the main tentec.com website is organized and working better, then all
>> updates will go there instead.
>> 
>> uh, look for the name of the radio you want in the link name, e.g.
>> 588-setup.... or 599-setup..
>> 
>> https://dl.dropboxusercontent.com/u/2246476/588-Setup-1.037.exe
>> 
>> https://dl.dropboxusercontent.com/u/2246476/599-Setup-2.3.exe
>> 
>> 73, KI4JPL
>> John Henry
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>> 
>> 
>> ------------------------------
>> 
>> Message: 4
>> Date: Tue, 16 Feb 2016 10:48:20 -0600
>> From: John Henry <jshenry1963@gmail.com>
>> To: tentec@contesting.com
>> Subject: [TenTec] Orion II 3.033xe on dropbox
>> Message-ID:
>>   <CAN6xzWcQErCxB+oUU1yi03FngvcSAV3CM1mzH7E1WyuK3QdgOw@mail.gmail.com>
>> Content-Type: text/plain; charset=UTF-8
>> 
>> Hi Andy,
>> 
>> Not sure why, but went ahead.
>> Here is the link:
>> https://dl.dropboxusercontent.com/u/2246476/566-Setup-3.033xe.exe
>> 
>> The file in a zip form is on the www.tentec.com website.
>> You should just have to download the .zip file, and unzip it and then run
>> it.
>> Unless something along the way is blocking it or unzipping it into the
>> wrong folder, etc.
>> 
>> Let me know if you do get this and if it works for you.
>> 
>> 73, KI4JPL
>> John Henry
>> 
>> 
>> ------------------------------
>> 
>> Subject: Digest Footer
>> 
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>> 
>> 
>> ------------------------------
>> 
>> End of TenTec Digest, Vol 158, Issue 21
>> ***************************************
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>