TenTec
[Top] [All Lists]

[TenTec] Orion Headphone Audio Level

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: [TenTec] Orion Headphone Audio Level
From: John Huffman <hjohnc@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 4 Apr 2016 13:26:57 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
The headphone audio level on my Orion 565 is quite low.  I have to have the
RF gain at 80 and the AF gain up about 80% for a decent level in a variety
of headphones.

However, if it turn on Binaural, the headphone audio level is about 50%
higher and on a par with my other radios.

I am using 3.032x7b firmware. I did RAM Clear, Master Reset, a second RAM
Clear, a second Master Reset, a power cycle, reset my menu items, and a
power cycle.   The issue remains.

Is this common?

Since the audio is capable of a normal output level as shown by using
binaural, is this most likely a hardware or software issue?  If so, what is
the likely culprit?

73 de K1ESE
John
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>