Now that's going to be a challenge, seeing has how the HW-32 did not have CW
mode!
I had forgotten but while still in the Army in Berlin, I had a HW-32 mounted
in my BMW 316 Tii, with a home brew center-loaded whip on the back bumper.
I made many hundreds of QSOs in the 2 years I used this, my best being a 20m
rag chew with JY1 - in SSB of course.
73 - Rick, DJ0IP
(Nr. Frankfurt, Germany)
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Katz Ajamas
Sent: Wednesday, June 08, 2016 4:19 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] CW mobile
Talk story!
I am in the midst of setting up for CW mobile in the PU truck. It will be a
first. Manual transmission and standard cab is making it difficult to fit
the HW32. Also have an old Alda 103 so may fit that.
Prior mobile was /mm in So Pacific, Philippines, and Pearl River basin. All
was good until China. There the swell is tall, and short. Towing cable,
quartered to the swell made for some interesting CW. For perspective: 33
meter boat, 8 meter swell. rig was FT301 and 20m inv V from one of the nav
masts.
73, -Bob ah7i/w4
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|