TenTec
[Top] [All Lists]

Re: [TenTec] Orion logic issue

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Orion logic issue
From: Jeff <w4dd09@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 31 Jul 2016 07:50:09 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Always start by reburning the firmware.  I have solved some  really odd
issues by doing this.

Jeff, W4DD

On Jul 31, 2016 7:20 AM, "D. Byron Allen" <n4axdxer@gmail.com> wrote:

It does boot up the latest software version, my problem started with out if
band receive on 40 meters only when I powered the rig up in 40 meters , no
other band was  this problem seen , i used the rig everyday , then didnt
use the rig for a week , and then this last symptoms of no operation on any
band.
Byron / N4AX

Sent from my iPhone

> On Jul 30, 2016, at 10:36 PM, Gary J FollettDukes HiFi <
dukeshifi@comcast.net> wrote:
>
> Sounds like yours is failing to boot up altogether. That’s probably the
CPU.
>
> Mine does not up and does receiver, I get S meter light and can even hear
signals. I just can’t adjust volume or operate any encoders or buttons
except the VFO’.
>
> Gary
>
>
>> On Jul 30, 2016, at 10:20 PM, D. Byron Allen <n4axdxer@gmail.com> wrote:
>>
>> My Orion I just started this last week , no receive on any band , no
pushbutton control , cant change bands , no s meter signal or s meter
lights.will not key or transmit. Sent to Ten Tec Friday , see what they
tell me next week!
>> Byron / N4AX
>>
>> Sent from my iPhone
>>
>>> On Jul 30, 2016, at 9:29 PM, Gary J FollettDukes HiFi <
dukeshifi@comcast.net> wrote:
>>>
>>> I have an Orion 1 with an odd problem. I thought I’d ask if anyone had
seen it before prior to an in-depth investigation.
>>>
>>> The radio powers up OK, boots up as it should, sometimes it will even
receive. The tuning encoders work fine at this point regardless.
>>>
>>> However, none of the small encoders or pushbuttons work.
>>>
>>> However, if I connect the radio to the computer, start N4PY software,
the radio connects and I can generally make all functions work on the Orion.
>>>
>>> From that point on, all buttons and encoders work fine until I turn the
radio off. I replaced the battery so that’s not an issue.
>>>
>>> Anyone seen this before?
>>>
>>> Gary
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>