Ira,
The tip with the pencil did indeed work for half a kHz.
Don't see the problem.
Then when we wanted to move up, it was Ajax mixed with water on a piece of flat
glass and then remove the Xtal from it enclosure and rub it in figure 8 through
the Ajax mix.
Finally clean with water and isopropyl alcohol.
Both methods worked for me.
73 - Rick, DJ0IP
(Nr. Frankfurt, Germany)
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Ira Franklin
via TenTec
Sent: Wednesday, August 17, 2016 7:34 PM
To: Discussion of Ten-Tec Equipment
Cc: Ira Franklin
Subject: Re: [TenTec] OT - Entry Level for boys
Hi Mike, that WAS remark gave me a big laugh. Many moons ago, when I got my
novice ticket I built a Heathkit DX40 and had a BC348 (tank radio I think )
That I replaced all the caps in and built a AC power to go on dynamotor
bracket. I owned the grand sum total of two crystals. One for middle of novice
band on 80 and other was for 40 meter novice band at very top of band. It was
actually marked 1/2 kc above band. A ham told me that was no big deal to just
open case and scratch it up with a lead pencil and frequency would be moved
down. Ahhh to be young, dumb and believe anything. lol Use to love calling CQ
and then tune whole band hunting for a answer. That was a great crystal and I
actually worked WAS on 40 with it. Then boom the sky opened up and started
raining those lovely White cards. That xtal was exactly on marked freq. Thank
goodness I passed general test and Dad got me a used B & W 5100 xmitter and
Collins 75A1 (or 2) cant remember. So no more white bad boy qsl cards. Ira
K4YMQEM63 AlabamaHam since 1958 and still loving it.
From: Mike Bryce <prosolar@sssnet.com>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Sent: Wednesday, August 17, 2016 10:24 AM
Subject: Re: [TenTec] OT - Entry Level for boys
Can’t help but to jump into this one!
Homebrew transmitter and HQ-110
I was short by two states for WAS from Official Observer reports!
Mike WB8VGE
> On Aug 17, 2016, at 11:06 AM, Reed Krenn <reed.krenn@gmail.com> wrote:
>
> Used Hammarlund HQ-110, Johnson Viking Challenger were my 'entry level'
> rigs.
>
> Reed / WW3A
>
> On Wed, Aug 17, 2016 at 1:53 AM, rick@dj0ip.de <Rick@dj0ip.de> wrote:
>
>> Bob, either you are a lot younger than I or you are wrong.
>> That was already mid-range.
>>
>> When I was a boy, entry level was a Heathkit AR-3 or Hallicrafters
>> S-38 receiver and a DX-20 or DX-35.
>>
>> 73 - Rick, DJ0IP
>> (Nr. Frankfurt, Germany)
>>
>>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|