I had not heard a Ten-Tec recommendation against DeOxit before. I use it on
connectors in my Omni VI and Paragon. Also on potentiometers and switches.
Never on PCB trace pushbuttons though. What kind of trouble can I expect
from my use of DeOxit on my Ten-Tecs?
Ken N6KB
On Sun, Jan 21, 2018 at 10:46 AM, Gary <dukeshifi@comcast.net> wrote:
> I have used CRC non-residue cleaner on Ten The radios successfully for
> decades with no adverse effects.
>
> Ten Tec switches are neither better nor worse than anyone else’s.
>
> The real key is to not leave behind any residues or lubricants.
>
> There is reason for caution regarding the plastic wafer switches in some
> radios but, by only using the lowest amount to achieve the task, they will
> be safe too.
>
> If you are really concerned, you can use an air gun to blow the liquid out
> of the wafer (and away from your face) as soon as your switch starts
> working again.
>
> Gary
>
> Sent from my iPad
>
> > On Jan 21, 2018, at 2:37 PM, Bill Cotter <n4lg@qx.net> wrote:
> >
> > Hello,
> >
> > I have a 580 Delta that has a dirty bandswitch. TenTec warns us not to
> use DeOxit or other general purpose cleaner/lubricants on their switches.
> Does anyone know what cleaner/lubricant products are approved or used by
> TenTec?
> >
> > Thanks - Bill N4LG
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|