TenTec
[Top] [All Lists]

[TenTec] TenTec Jupiter and many accessories FS

To: TenTec List at contesting <tentec@contesting.com>
Subject: [TenTec] TenTec Jupiter and many accessories FS
From: "Ken, W8EK" <kenw8ek@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 20 Feb 2018 19:13:45 -0500
List-post: <mailto:tentec@contesting.com>

TenTec Jupiter HF Transceiver, Desk Mic, Speakers,
Power Supplies, and Keyboard For Sale:
.

.
TenTec Jupiter 538 HF Transceiver:

I think most of us on this reflector know what a
Jupiter is, so I will not go into details as to what
all it is.  It is a great transceiver.  Maybe not as
great as an Orion or Omni VII, but still a great rig.

This particular Jupiter has all of the extras.  It has
the optional internal automatic antenna tuner that
functions very well.

It also has the "CW Personality" kit added.  This
permits one to send CW from a computer keyboard
that is attached to the rig.  Of course you can
also use a regular CW keyer, or paddle. It will
display received CW on the LCD display.  However
the received CW is only as good as what is sent.
If a person sends NNQ instead of CQ, that is what
is displayed!

This particular unit works 100% like it should.
Cosmetically, it looks like new.  I can not find a scratch
or defect on it.  This is a great unit!
It includes power cord and paper work for only $675.
.

.
TenTec 705 Desk Microphone

The 705 desk mic is the standard desk mic used with
the Jupiter.  It has a 4 pin plug wired for TenTec on
it, as used by the Jupiter.  It has an electret mic
element that has great frequency response.

Two are available.
One is new, still in its original box, only removed to
verify its operation.  $85
The second is out of the box, but still looks fine, and
of course operates fine.  With paper work for $70.
.

.
TenTec 307 B Speaker

This is the black speaker used with most TenTec rigs.

This one works fine and looks like new. No scratches
or defects.
Paper work is included for $85.
.

.
Gap "Hear It" Speaker:

The Gap "Hear It" is a compact speaker with digital
signal processing to reduce or eliminate noise. This
speaker greatly improves signal to noise ratio and
speech clarity. It can be used for AM, FM or SSB
voice signals. This innovative product was developed
in England and is available now in the USA.
-
A front mounted bi-color LED lets you know when the
speaker is drawing power (red) and when it is processing
(green).
-
The rear panel features a control used to set the eight
levels of noise cancelling. It also has the DC input jack
for the required 12-28 VDC at 500 mA. An audio lead
is included (3.5 mm mini mono plug). This device comes
with a DC power cable, or you can purchase a "Wall
Wart" for operation from AC for an extra $10.

It uses a convenient "Gimble Mount".

This one works fine and looks like new. These sell for
about $170 new. Buy this one for only $110.
.

.
TenTec 252 MO Power Supply:

The TenTec 252 MO provides up to 20 amps at 13 V DC to
power most any 100 Watt HF transceiver. An ammeter is
included.

The color is the chocolate brown / blackish / dark grayish
that  matches the TenTec Omni A and D series A, B, and C,
the Hercules Amp, Delta 580, and others of this era, but
it can be used on most 100 W rigs, including the Jupiter.

The 4 pin molex output plug matches many, many TenTec rigs,
but this one has had heavy duty binding posts added, so
that it can be used with any rig.

This one works fine, and looks good.
With paper work for $65.
.

.
Astron RS-20 A, 20 amp Power Supply:

If you do not need a TenTec power supply, this one
will do a great job.

The Astron RS-20 A is a very common power supply around
most ham shacks. It provides 13 V DC for many ham rigs.

Features:
Solid State Electronically Regulated
Fold-Back Current Limiting Protects Power Supply from
...excessive current & continuous shorted output
Crowbar Over Voltage Protection
Excellent Regulation & Low Ripple at low line input voltage.
Heavy Duty Heat Sink
Chassis Mount Fuse
Three Conductor Power Cord

Specifications:
Input Voltage 105-125Vac
Output Voltage 13.8Vdc (internally Adjustable 11-15V)
Ripple Less than 5mV peak-peak (full load & low line)
Continuous Duty 16 Amps; ICS 20 Amps
Size 5" x 9" x 10-1/2"

This particular supply works great. It only varies 0.01 Volts
with a load! Cosmetically it looks great.

With paper work for only $65.
.

.
Computer Keyboard to use with Jupiter CW personality

This keyboard is smaller than the normal computer
keyboard making it ideal for use with the Jupiter
CW personality.  It has a PS/2 connector, as needed
by the Jupiter.

It is only 10 x 6 inches in size.

It works fine and looks really great.  $15
.

.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400







.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] TenTec Jupiter and many accessories FS, Ken, W8EK <=