TenTec
[Top] [All Lists]

Re: [TenTec] orion encoders?

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] orion encoders?
From: Barry N1EU <barry.n1eu@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 8 Apr 2018 23:03:25 +0000
List-post: <mailto:tentec@contesting.com>
http://tentecwiki.eqth.net/doku.php?id=565enc

On Sun, Apr 8, 2018 at 9:16 PM, Kim Elmore <cw_de_n5op@sbcglobal.net> wrote:

> Can you describe that method? I have an O II that’s showing signs of a
> dirty switch in the small encoders. I just successfully replaced every
> electrolytic capacitor in my old TS-930S (about 150 of ‘em) so replacing
> the coders can’t be a whole lot worse.
>
> Kim N5OP
>
>
>
> "People that make music together cannot be enemies, at least as long as
> the music lasts." -- Paul Hindemith
>
> > On Apr 8, 2018, at 15:51, MadScientist1948 <dukeshifi@comcast.net>
> wrote:
> >
> > I ordered several dozen of them.
> >
> > From now forward, if I have to go to the work to replace ONE encoder on
> any Orion I get through here, I will replace all of them. They are low cost
> and that is a good preventative repair on Orion’s once the two hour
> disassembly job is already done!
> >
> > I have a pretty good method for getting them off the board easily.
> >
> > Gary
> >
> >> On Apr 7, 2018, at 6:57 PM, Barry N1EU <barry.n1eu@gmail.com> wrote:
> >>
> >> The S in S0015 means it has a switch.
> >>
> >>> On Sat, Apr 7, 2018 at 11:39 PM, Rodney <w3krq@dejazzd.com> wrote:
> >>>
> >>> Do the ones from digikey have a switch .
> >>>
> >>> -----Original Message----- From: Barry N1EU
> >>> Sent: Friday, April 06, 2018 12:48 PM
> >>> To: Wes Attaway (N5WA)
> >>> Cc: Discussion of Ten-Tec Equipment
> >>>
> >>> Subject: Re: [TenTec] orion encoders?
> >>>
> >>> No, get the recommended ones from Digi-Key, they're in stock:
> >>> https://www.digikey.com/product-detail/en/bourns-inc/PEC11L-
> >>> 4225F-S0015/PEC11L-4225F-S0015-ND/4699180
> >>>
> >>> 73, Barry N1EU
> >>>
> >>> On Fri, Apr 6, 2018 at 11:16 AM, Wes Attaway (N5WA) <
> >>> wesattaway@bellsouth.net> wrote:
> >>>
> >>> How about these, from Mouser ...
> >>>>
> >>>> PEC11L-4015F-S0015
> >>>>
> >>>> They have 1200 in stock
> >>>>
> >>>>  -------------------
> >>>> Wes Attaway (N5WA)
> >>>> (318) 393-3289 - Shreveport, LA
> >>>> Computer/Cellphone Forensics
> >>>> AttawayForensics.com
> >>>>  -------------------
> >>>>
> >>>> -----Original Message-----
> >>>> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of
> Barry
> >>>> N1EU
> >>>> Sent: Friday, April 06, 2018 6:54 AM
> >>>> To: Discussion of Ten-Tec Equipment
> >>>> Subject: Re: [TenTec] orion encoders?
> >>>>
> >>>> Sorry, the encoders are out of stock at Mouser, so I had to delete
> that
> >>>> link.  The 20 PPR encoders ARE available but the 15 PPR encoders are
> more
> >>>> suitable (but are out of stock).  I suggest you try one of the other
> >>>> vendors (Newark, Allied, etc)
> >>>>
> >>>> Barry N1EU
> >>>>
> >>>>> On Fri, Apr 6, 2018 at 7:50 AM, Barry N1EU <barry.n1eu@gmail.com>
> wrote:
> >>>>>
> >>>>> Here's a direct link to order 10 encoders for $18.50 from Mouser:
> >>>>> https://www.mouser.com/ProjectManager/ProjectDetail.
> >>>>> aspx?AccessID=443fb4d200
> >>>>>
> >>>>> Barry N1EU
> >>>>>
> >>>>>> On Fri, Apr 6, 2018 at 7:24 AM, Ted Bryant <w4nz@comcast.net>
> wrote:
> >>>>>>
> >>>>>> Here's what I used to replace all six small encoders on my Orion II.
> >>>> They
> >>>>>> work very well.  I've had no problems with encoders since.
> >>>>>>
> >>>>>> From Mouser:
> >>>>>>
> >>>>>> 652-PEC11L4225FS0015 PEC11L-4225F-S0015 ENCODER
> >>>>>>
> >>>>>> Bought 10 for about $16
> >>>>>>
> >>>>>> 73, Ted W4NZ
> >>>>>>
> >>>>>>
> >>>>>> -----Original Message-----
> >>>>>> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of
> >>>>>> MadScientist1948
> >>>>>> Sent: Thursday, April 05, 2018 11:54 PM
> >>>>>> To: Discussion of Ten-Tec Equipment
> >>>>>> Subject: [TenTec] orion encoders?
> >>>>>>
> >>>>>>
> >>>>>> Well, I sold off all of my Orion small encoders to help others
> repair
> >>>>>> their
> >>>>>> radios.
> >>>>>>
> >>>>>> Now I have an Orion 2 with two bad encoders.
> >>>>>>
> >>>>>> Does anyone have any or does any one recall the replacement I had
> heard
> >>>> of
> >>>>>> previously?
> >>>>>>
> >>>>>> Gary
> >>>>>>
> >>>>>> W0DVN
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> TenTec mailing list
> >>>>>> TenTec@contesting.com
> >>>>>> http://lists.contesting.com/mailman/listinfo/tentec
> >>>>>>
> >>>>>
> >>>>>
> >>>> _______________________________________________
> >>>> TenTec mailing list
> >>>> TenTec@contesting.com
> >>>> http://lists.contesting.com/mailman/listinfo/tentec
> >>>>
> >>>>
> >>>> _______________________________________________
> >>> TenTec mailing list
> >>> TenTec@contesting.com
> >>> http://lists.contesting.com/mailman/listinfo/tentec
> >>>
> >>> ---
> >>> This email has been checked for viruses by AVG.
> >>> http://www.avg.com
> >>>
> >>>
> >>> _______________________________________________
> >>> TenTec mailing list
> >>> TenTec@contesting.com
> >>> http://lists.contesting.com/mailman/listinfo/tentec
> >>>
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/tentec
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>