Looks like Gary’s has a little more drop-off than Fernando’s.
However, such loss of output is pretty common in may rigs. However, the
difference between 65 and 100 watts output is not perceptible by the person
listening on the other end so no worries.
Gary
> On Apr 15, 2018, at 3:51 PM, Fernando <n2fq@sbcglobal.net> wrote:
>
> FWIW..
> My numbers are on the far right column.
>
> Using the TenTec dummy load and reading
> the watt meter on my Palstar AT1KM tuner:
>
> 1.900 Mhz 110 Watts 110
> 3.750 Mhz 120 Watts 110
> 7.150 Mhz 110 Watts 100
> 10.125 Mhz 110 Watts 100
> 14.175 Mhz 110 Watts 92
> 18.110 Mhz 105 Watts 90
> 21.225 Mhz 95 Watts 87
> 24.930 Mhz 90 Watts 85
> 28.050 Mhz 80 Watts 82
> 28.500 Mhz 75 Watts 82
> 29.000 Mhz 70 Watts 80
> 29.650 Mhz 65 Watts 80
>
> Using Old Jupiter with Rev 1.33 b3.
>
>> On Apr 15, 2018, at 12:16 PM, Gary Hendricks <k4mt1950@charter.net> wrote:
>>
>> I was looking at purchasing a jupiter as a backup rig. Here is the power
>> output per band
>>
>> 1.900 Mhz 110 Watts
>> 3.750 Mhz 120 Watts
>> 7.150 Mhz 110 Watts
>> 10.125 Mhz 110 Watts
>> 14.175 Mhz 110 Watts
>> 18.110 Mhz 105 Watts
>> 21.225 Mhz 95 Watts
>> 24.930 Mhz 90 Watts
>> 28.050 Mhz 80 Watts
>> 28.500 Mhz 75 Watts
>> 29.000 Mhz 70 Watts
>> 29.650 Mhz 65 Watts
>>
>> Is the power drop off above 21 MHz look normal?
>>
>> Gary K4MT
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|