Re: [TenTec] KV read

[Bob McGraw K4TAX <rmcgraw@blomand.net>]

One has to interpolate the marking and space between the numbers.  Thus 
there is 800 volts between the 2.4 and3.2 or 2400 volts and 3200 volts.  
Then 1/2 way between the two would be 2400 + 400 or 2800.   Then half 
way between 2800 and 3200 would be 400 volts or 2800 +200 = 3000.  So 
3100 would be slightly above the 3000 volt value.
73

Bob, K4TAX


On 8/15/2018 9:19 AM, Rodney wrote:
> O I understand that, but you can not tell where 3100 volts is, you 
> guest it somewhere between 2.4 and 3.2
> .2
> -----Original Message----- From: Bob McGraw K4TAX
> Sent: Wednesday, August 15, 2018 9:56 AM
> To: tentec@contesting.com
> Subject: Re: [TenTec] KV read
>
> As found in the manual, page 2-1 under METER, see the following.
>
> 2-2.7 METER   This switch is used to select what is being displayed on
> the built-in illuminated meter.  When in the Ig position it selects grid
> current to be read on the 0 - 400 mA full scale.  The Ep positions
> selects the plate voltage {HV} as read on the 0 - 4.0 {4000 volts full
> scale}.  When placed in the FWD position it reads forward power which is
> read on the 2.5 KW full scale.    In all cases, standard mathematical
> multipliers of X10, X100, or X1000 apply as appropriate.
>
> This should explain how to read the Multi meter with its multiple
> scales.   From experience, the metering system with the Centurion is
> very accurate and easy to use and understand.
>
> Should you need further explanation, do ask.
>
> > >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> ---
> This email has been checked for viruses by AVG.
> https://www.avg.com
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec