Hi folks,
sorry to bother you over here.
I found an interresting things on O2 internal meter so i would like to ask for
help.
At first I found that the analog power meter on O2 is showing only 35W when the
power is set to full 100 on display. An external calibrated NAS power meter to
dummy load says 96W on 20m so it looks like analog internal power meter issue?
I know it can be adjusted but I am investigating around before I will touch it
inside...
Second I found that LCD screen slightly flickering or dimming when keying the
TX. It is not so much but it is visible on all bands. I checked the PSU, power
cable, all looks ok, it drawing around 20-22A on key down, ferrite clamps on
both ends of cable are used.
I upgraded O2 from old V3.025 to V3.033xd then RAM clearance + Master reset
done > filters setup has been done then after. So I do not know if it can be
related to that fw upgrade?
I know these are not major issues as the rest of O2 works nice and i enjoying
it but I would be happy to solve it...
Thanks,
73 - Petr, OK1RP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|