>Hi Dick and Dave and all,
>
>I'll post this because it's related to a common 160 complaint on
>analyzers, any other responses will be e-mail only on this topic.
>
>> >Has anything been done to increase the output signal level
>> >or include a filter in the MFJ-259?
>> >73, Dick -K5QY
>>
>> 1) The Autek RF-1 has the same problem by the way.
>> 2) Does anyone know if the the new AEA unit also has the same
>> susceptability to external (AM broadcast band) signals?
>> Dave
OK, I'm not an engineer but common sense suggests that a bandpass filter might
help. The ICE 403 is for 1.8-2 MHz and the 402 cuts off all sigs below 1.8 MHZ.
Am I missing something here?
And, yes, RBS/RW sells them.
Craig
<bold>73 Craig Clark W1JCC
Radio Bookstore & Radioware
</bold>PO Box 209 - 47 Fitzgerald Rd
Rindge NH 03461
Orders: 800 457 7373 - 603 899 6957
10am- 6pm EST
Fax: 603 899 6826
24 hours, 7 days per week
email: nx1g@top.monad.net
radware@radio-ware.com
sites: www.radio-ware.com
www.radiobooks.com
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|