This is a multi-part message in MIME format.
------=_NextPart_000_0006_01BE8D1F.CA3F9620
Content-Type: text/plain;
charset="iso-8859-2"
Content-Transfer-Encoding: quoted-printable
Hello everybody,
thanks for reading this message.
I am considering to put up a new beverage system for the next season,
just dismateled all the previous antennas b=B4cause of the spring
agricultural works on the piece of land I use to spread them.
I have several questions.
I have used the RG-58 cable but the loss was very high ( the distance
from shack to the feed point is abt 300 m ) this is to avoid the
interaction with the vertical transmitting an. I would like to replace
it now wit low loss cable used for sat tv ( 75 Ohm )
Should I transform from 75Ohm to 50Ohm on the separate receiving ant in
my IC-756 ? or just simly connect the ANT to the RCA socket ?
Does the mismatch have gerat influence on the overall receiving
performance ?
I am considering to build a phaised two Beverages in one direction where
my space is limited, however I would like to use the Beverages for
multiband operation 80 to 40 m. Any suggestions on the spacing ?
Can I use the TV Ant splitters for the phaised Beverages ? If not what
is the phasing method for multiband operation ?
There are many questions, I would be garateful for any hints.
Thanks in advance
73 ! Dan, OK1DIG
mailto: ok1dig@iol.cz
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|