Topband
[Top] [All Lists]

Topband: RE: Spatial CW

To: <topband@contesting.com>
Subject: Topband: RE: Spatial CW
From: g4ifb@totalise.co.uk (Gary Hinson)
Date: Tue, 11 Jul 2000 15:58:35 +0100
Goose etc.,

There was a spatial CW processor design published by the RSGB in RadCom, called
the "Stereocode".  It used a combination of phase shifting and frequency
filtering to generate a stereophonic effect.  The design was quite complex,
as I recall, but I know several were built & used.  Reports of its effectiveness
varied, much as today's continuing dialogue about DSP.  Sorry, but I don't
have a proper reference, not even a rough publication date I'm afraid.

I experimented with a much simpler design: a crude LPF for left ear, HPF for 
right.  It works, to a degree, and makes it a bit easier to listen through
a wide CW filter for specific callers ... but it takes some getting used to and
IMHO it's a bit of a gimmick, worth half a db better S/N maybe but not a patch
on an experienced, alert & fired-up operator hungry for QSOs.

These days, it should be relatively easy to do the phasing and filtering thing
in DSP, surely?

73 & GL,
Gary  G4IFB   aka M6T on 160m in CQ WW



--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • Topband: RE: Spatial CW, Gary Hinson <=